Showing posts with label faery craft. Show all posts
Showing posts with label faery craft. Show all posts

Sunday, February 27, 2011

Faery Art Doll Tutorial

Bet you've been wondering where I've been or what I've been up to. Well for the most part, we've been getting over head colds while the kiddo was off this week from school for mid winter break. I am very much looking forward to Monday morning and the kiddo going back to school. It's been a very long 2 weeks with the kiddo home (He was only in school once last week because of the stomach bug going around).

Somewhere I found time to create another project for the February Fairies event over at The Whimsical Cottage. It was wonderful to create something for me for a change since I'm always making something for other people :)

You might notice that this little fae looks a bit familiar. I used the same techniques for the Gypsy that I made last year.

Hop on over to find out how to make your own Faery Art Doll!!




signature

Tuesday, February 8, 2011

Tutorial - Faery Magnets


I love Faeries. Not only do I love them, I love crafting them. Here is a tutorial that I had written for the February Fairies event over at The Whimsical Cottage. In case you missed the original posting, here it is again. I'll also be adding it to my tutorial page. So get ready for some faery fun!!

We're going to make Faery Clothes Pin Magnets.



For this project, you will need:
Wooden clothes pin (the No Roll kind)
Craft paint or any kind of acrylic paint
Embroidery floss
Sand paper 220 grit
Magnet strip
Glue (I used E6000, any strong glue will work)
Wire (20 - 22 gauge)
Drill/dremel
1/16 drill bit
Extra bits (paper, fabric scraps, flowers, beads, etc)
Wire cutters
Round nose pliers
Scissors
Pencil
Paint brush
Small piece of card stock (for hair construction)

What you may want:
Tweezers
Small eye hooks
Vice/clamp (for holding the clothespin while drilling)
Safety glasses
Mask (for dust)

Step 1:

Determine which side of your clothespin you want as the front. With your sand paper, sand the front edges of the clothes pin a little bit to round the edges. You can sand the edges a lot if you wish, but it’s not necessary. Also sand any rough spots on the clothespins.

You may find that after sanding the edges of the clothespin, you loose a little bit of definition between the sections of the pin. Take a small piece of sand paper, folded it, and gently sanded in the crease of the clothespin, especially at the front, to bring back a bit of definition lost during the majority of the sanding.




Step 2:

With your pencil, determine where you want the holes for the arms drilled. Once you have determined where you want the hole, draw a small dot. It’s best to put the dot as close to the center of the clothespin as possible. Repeat for the other side, eye balling to make sure they are even. Rule of thumb: You want the hole you drill for the arms to be slightly larger than your wire, no larger.

Be very careful and use a slow speed when drilling. Hold the drill straight up and down. Drill your hole all the way through the clothespin. You may need to sand the hole a touch after drilling to remove the flaked wood. Touch up with skin tone paint if needed.


Step 3:

Now we're ready to paint. Whatever color you are using as a skin tone, go ahead and give your faery a coat of paint. There's no need to worry about painting the back, unless you are making a hanging faery. For my faery, I used light flesh tone paint. After the first coat of paint is dry, give it a second coat.

Step 4:

When your paint is dry, it is time to add the arms. Use your wire cutters and cut a piece of wire 5 – 6 inches in length. With your round nose pliers, grasp one end of the wire tightly and curl the end of the wire with the tip of the pliers to make a hand.
Insert the uncurled end of the wire into the drilled hole and pull through. Determine the length of arm you wish your faery to have, bend at the shoulder to secure the desired length. Bend at the shoulder for the other arm. Clip the excess wire and curl the end into the second hand. Half way up the arm, make a second bend for the elbow.


Step 5:

Take your pencil and lightly draw the facial features. (At this point, if you wish for your faery to hang, screw your eye hook in the center top of your clothespin until finger tight). Once you have a rough idea of how the face will look, it’s time to give your faery a bit of hair. I choose to give my faeries hair at this point because it helps me to visualize the faery's final personality and what they will look like in the end.

For this step, choose a color of embroidery floss for the hair. Cut a small length of your hair color and set it aside. Take your cardstock, hold it in one hand and begin to wrap the floss loosely around the cardstock starting at the bottom and wrapping upward. Continue to wrap a total of 15 times. Once you have finished wrapping (making sure you finished wrapping at the bottom of the cardstock), cut the remainder of the floss and set aside. Take your small length that you had cut previously and feed it between the cardstock and floss. Slide the floss to the top of your wrapped floss and tie tightly. Remove your wrapped floss from the cardstock and cut the loops of thread opposite your tied knot.



Step 6:

Arrange your “floss wig” so that the knot is on the underside, make sure you keep the 2 sections of hair even. Place a generous amount of glue on the top of your faery's head. With the knot in the center of the head, press your wig into the glue and arrange your hair, making sure you cover all exposed sides.




Step 7:

Now the fun part. Let your imagination go and have fun with it. This is also the point you will begin to decide what type of faery you wish to create if you didn’t already have an idea in mind once you began. Don't be afraid to layer different elements to create your faery.

I've decided mine was to be a Woodland Faery. For this one, I painted the faery's top green. I then glued a piece of green fabric I had cut into the shape I wanted, then roughed up the edges a bit. I layered a piece of leather I had fashioned into a belt with a tiny gold bead as a clasp.

For the wings, you can use paper, feathers, lace, fabric flower petals, etc. For my faery, I used an acetate butterfly that came with some scrapbook embellishments. I cut the butterfly in half and glued each section onto the back of my faery. Once the glue has dried, cut the strip of magnet into the length you want and glue that onto the back of your faery. Finish off by painting your faery's little face and add a bit of embellishment if you wish.



And there you are! A cute finished faery of your very own!



The different faery possibilities are endless! Have fun with it!!



signature

Wednesday, February 24, 2010

Flower Faery Trinket Box with Tutorial

This was a project that I had started a while back and like many projects was placed on the back burner for some time. I was inspired by the Faery Swap on Craftster to drag it out and finish it up.


I have always held a special place in my heart for flower faeries. I love growing herbs and flowers in my various gardens and feel a connection to the flower fae.

I had a bunch of cheap cigar type boxes laying around for years. And had no idea what to use them for. It wasn't until I received a few birthday cards with faeries on them that I knew exactly what to use one for.

Box before trinket box transformation

To start, I cut off the top of the box with a craft knife like so. I did this to make it easier to handle, decorate and position it where I wanted when it came to reassembly.

Box with removed lid

After cutting off the lid, I used a scrap piece of sand paper to lightly rough up the surfaces. If you are using an unfinished box, you shouldn't have to rough the surfaces for paint (you are more than welcomed to do so if you wish). Being that mine was covered with a glossy type paper, I needed to rough it up so the paint would adhere better. You can also use paper to cover the surfaces of your box if you like.

Box and lid sanded down a bit

After all the surfaces that are going to be painted are sanded down, I brushed off the dust and set about painting. Because I didn't have in process pictures of my original box, I am making another one as I go. I used acrylic craft paint and brushed on a few coats, letting each coat fully dry in between. This box only needed 2 coats. Depending on your paint or the kind of coverage you want, more coats might be needed.
TIP: It helps when painting to alternate your paint strokes for each coat of paint you put on. Doing so gives a better coverage and looks smoother after it's all painted.

Base coat of paint on the box and lid

Once your background is how you like, it's time to embellish! Embellishments can be anything you want. For my trinket box below, I used greeting cards, tissue paper, ribbons, lace, paint, sequins, stickers, rub-on transfers, fabric flowers, seed beads, glitter, and polymer clay. In general, I used a regular white glue to glue everything onto the box. Before attaching the 3 dimentional elements to the box, I brushed a thin coat of white glue over all the paper elements to seal them. For the 3D elements (beads, flowers, ribbons including the ribbons for the hinges, polymer clay pieces), I used E6000.
TIP: If using lace, depending on the type you use, you may or may not have to use a strong glue to glue it down. The lace I used was thin enough I was able to use the white glue.

Top

Just keep placing your embellishments where you would like them to be and keep covering the box until you have your desired look. It's that simple!

Front of box

In the above picture you can see the little "feet" that have been attached. I used some plastic beads my grandmother had given me. They are snowflake beads with a round faceted one glued together then glued to the box. I originally used hot glue for the feet. But after they popped off the bottom, I went back in with my E6000 glue and reattached. They haven't come off yet!

Left side of box

Right side of box

Close up of the "feet"

After all your embellishing is finished, it's time to reattached the lid to the box. This was done using a wide ribbon and gluing half onto the lid and the other half onto the box. I moved the lid slightly forward to give a nice lip in order to open the box easily.

Back hinge

The lip for opening

Inside and hinge

I also made sure to glue another piece of wide ribbon to the inside to help reinforce the hinge, making sure to just glue the lid and base and NOT the hinge itself so that it will remain movable. For the bottom, I cut and glued down a piece of scrapbook paper. You can also embellish the inside lid if you like, but for my faery box, I left it plain black. Maybe I'll go back and embellish it, but for now I like it as it is.


Happy Crafting!
~K.Michele
Related Posts Plugin for WordPress, Blogger...